Skip to Content

ZACUTO Z-FINDER PRO 2.5X (3" SCREEN)

Web Code: 586RES311
586RES311-Z-FIND-PRO3-1-01.jpg
ZACUTO Z-FINDER PRO 2.5X (3" SCREEN)
Only $554.99 CAD
 
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Check Other Stores
Call store to confirm:
 
Product Highlights
  • 3 Extender Frames
  • 2.5x Lens
  • Lens Cap & Protective Boot
Read More
 
You must complete all required fields.
 
  • 3 Extender Frames
  • 2.5x Lens
  • Lens Cap & Protective Boot
  • Lanyard Hook and Lanyard
  • Anti-fog Coating Protective Cover
  • Gorilla Plate with DSLR Short Body Frame
  • Extra Anti-fog Coating Protective Cover
  • Camera, Lens, and Hood NOT included
  • Optical Viewfinder that allows DSLR cameras to have the correct form factor for video It offers 2.5x focusable magnification,a 40mm diameter Zacuto optical designed lens, an anti-fog coating protective cover, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens
  • The diopter allows you to dial in the focus to match your eye
  • If you need extra focal point you can use the Z-Finder Extender Frames
  • The Z-Finder Pro 2.5x has a diopter range of -4.75 and up (unlimited with extender frames)
  • These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extend the Z-Finder glass further way from the LCD screen for people who are farsighted
  • Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera
  • The Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws
  • The rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure
  • This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame
  • If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it
  • With the Z-Finder Pro, you are also a step closer to using one of our Gorilla Support Rigs, as they use the same baseplate as the base
  • Please note:
  • 1. The anti-fog coating protective covers are expendable. They act as a protective cover to your lens so your lens does not get damaged and they also help prevent the fogging of the lens. If you need extra anti-fog protective covers, in case they are scratched, lost, damaged, etc., they can be purchased separately here
  • 2. If you are using a battery grip on your small bodies DSLR camera, you will need this battery grip frame. If you have a taller body camera like the Canon 1D Mark IV you will need the tall body frame
  • The Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification
  • The tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole
 
loading
Back top top Skip to Navigation