XProN TTL Wireless Flash Trigger cannot only control the flashes with built-in Godox wireless X system, e.g. camera flashes, outdoor flashes and studio flashes, but also can control the Nikon original flashes, when used in combination with the X1R-N Receiver. Featuring multi-channel triggering and stable signal transmission, this flash trigger applies to hot shoe mounted Nikon series cameras.
Built-in Godox 2.4G Wireless X System with Versatile Uses:
As a Wireless Godox Flash Trigger (for camera flash, outdoor flash and studio flash)
As a Wireless Nikon Speedlights Trigger
As a Wireless Shutter Release Trigger
As a Flash (without Godox X system) Trigger with 2.5mm Sync Cord Jack
Support i-TTL Autoflash and Professional Functions:
16 groups and 32 channels to wirelessly control and trigger. Add 01 to 99 wireless ID settings, which can only achieve triggering when the channels and wireless IDs of the master and slave unit are set to the same, avoiding signal interference effectively.
Fully support TTL autoflash, 1/8000s high-speed sync, multi flash, manual flash, flash exposure compensation, TCM transform function, magnification function, one-shoot & multi-shoot setting, group modelling lamp control, group zooming, adjusting all groups' output value simultaneously, etc.
TCM transform function can transform the flash value in TTL mode into the power output value in M mode.
Magnification function enables the groups to be switched between the one-goup and multi-group mode.
Outstanding Design, Easy Operation and Great Portability:
Extra large LCD panel, 5 group buttons and 4 function buttons offer convenient manipulation.
Supports Type-C USB firmware upgrade and wireless triggering by 2.5mm sync cord jack.
Xpro-C is quite portable, as it weighs only 80g,
Compatible cameras: Nikon cameras (i-TTL autoflash), Support for the cameras that have a PC sync socket
Power Supply: 2 x AA batteries
Flash Exposure Control
TTL autoflash: i-TTL
Manual flash: Yes
Stroboscopic flash: Yes
High-speed sync: Yes
Second-curtain sync: Yes
Flash exposure compensation: Yes, +- stops in 1/3 stop increments
Flash exposure lock: Yes
Focus assist: Yes
Modelling lamp: Control the modelling lamp by the flash trigger
Beeper: Control the beeper by the flash trigger
Wireless setting: The receiver end can control the camera shooting through the 2.5mm sync cord jack
ZOOM setting: Adjust the ZOOM value by the transmitter
TCM function: Transform the TTL shooting value into the output value in the M mode
Firmware upgrade: Upgrade through the Type-C USB port
Memory function: Settings will be stored 2 seconds after last operation and recover after a restart