Skip to Content

SONY VGC3EM VERTICAL GRIP

Web Code: 137SON002  •  Mfr Code: VGC3EM
1492627563000_IMG_784731.jpg
1492627518000_1333271.jpg
1492627563000_IMG_784727.jpg
1492627563000_IMG_784728.jpg
1492627563000_IMG_784729.jpg
1492627563000_IMG_784730.jpg
1492627563000_IMG_784732.jpg
1492627563000_IMG_784733.jpg
Only $469.99 CAD
 
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Call store to confirm:
 
Product Highlights
  • Vertical/Horizontal Operability
  • Magnesium Alloy
  • Grip Shape for Assured Hold
Read More
 
You must complete all required fields.
 
  • Vertical/Horizontal Operability
  • Magnesium Alloy
  • Grip Shape for Assured Hold
  • Dust-/Moisture-Resistant Sealing
  • Equal vertical and horizontal operability:
  • VG-C3EM body design makes it almost equally easy to control the camera in vertical and horizontal positions, thanks to keys and controls that are nearly the same as those on the back of the camera body. For example, the vertical grip provides a Multi Selector for fast selection of an AF point.
  • Grip shape for assured hold:
  • VG-C3EM has a grip shape, which allows you to get an enhanced hold for confident shooting in vertical position that is virtually the same as that in horizontal position.
  • Nearly 2x longer stamina:
  • VG-C3EM vertical grip loads two NP-FZ100 batteries (Sold Separately) in its housing. You can check the camera LCD monitor to see the remaining power of the battery in use as a percentage (1% minimum unit) on the power indicator. When the power of one battery runs out, the other battery automatically switches on to continue operation.
  • USB power charging via camera body:
  • You can charge batteries loaded in the vertical grip, using the camera's USB port without detaching the grip from the camera body.
  • Highly rigid magnesium for exterior:
  • Made of magnesium alloy, the same as a9, this grip is highly rigid and lightweight.
  • Careful attention to dust/moisture resistance:
  • Effective dust- and moisture-resistant sealing is applied to key and controls, as well as ports and electric contacts, for tough usage in harsh shooting conditions.
  • Specifications:
  • Dimensions (WxHxD): Approx. 126.9 x 107.9 x 61.8 mm (5 x 4 1/4 x 2 1/2 inches)
  • Weight: Approx. 272 g (9.6 oz)
  • Notice:
  • The simultaneous installation of this unit with the LA-EA2 / EA4 mount adaptor is not supported. If both are installed at the same time, the narrow clearance between the unit and the lens mount adaptor makes it hard to hold the grip.
  • Compatibility:
  • Sony a7 III
  • Sony a7R III
  • Sony a9
 
 
 
loading
;
Back top top Skip to Navigation