The Beholder EC1 is designed specifically for professional filmmakers looking for a single hand-held stabilizer for a large range of medium and small cameras. The Beholder EC1 is lightweight, easy to use, and can be carried in the supplied case or a small photographer bag.
Designed for DSLR & mirrorless cameras up to 5 lbs
Stabilized with a 32-bit controller and a 12-bit encoder system
Adaptive PID algorithm produces reliable stability and efficient battery life
Battery operating life of up to 20 hours with 3 rechargeable 18650 batteries
4 Modes of operation with Auto-Inversion and an OLED status display
With an innovative manual point and lock composition adjustment feature
Quick-release baseplate with a tool-less balancing system
2 x 1/4-20 Accessory mounts & a 3/8-16 tripod mount integrated into the handle
360 degree Motors:
The 3-Axis gimbal features three 360 degree rotating brushless motors that give you a limitless range of motion.
Designed for Various Cameras:
With a payload range of 2-4.5 lbs, the EC1 has the ability to stabilize a wide range of today's popular DSLR and mirrorless cameras. Sony a6300, Sony a7SII, Panasonic GH4, and the Canon 5D Mark III are just a few cameras that the EC1 can handle.
Using a 32-bit controller with a 12-bit encoder, the EC1 uses an adaptive PID algorithm to produce a reliably efficient hand-held stabilizer.
In Lock Mode, the Yaw, Pitch, & Roll axis work together to keep the camera pointed in one direction. The camera's composition will stay the same no matter how you move the handle.
Point & Lock:
Quickly lock your camera into any position by manually pointing and holding it in any direction. After a few seconds, the camera will lock and hold its position until it is reset back to default.
Multiple Follow Modes:
The EC1 features 3 different follow modes. In Yaw-Axis Follow Mode, the EC1 will only follow your Pan movements. In Pitch and Yaw-Axis Follow mode, the EC1 will follow your Pan and Tilt Movements. Finally, the 3-Axis Follow Mode gives you full control allowing you to Pan, Tilt, and Roll.
Switch to Inverted Mode at any time by simply flipping the handle over the camera. Inverted Mode can be operated in conjunction with any of the Lock and Follow Modes.
OLED Status Display:
A display screen located on the back of the handle conveniently provides you with information on the battery life and operating mode.
With a newly designed quick-release baseplate system, the EC1 is easy to balance without the need of any tools.
Multiple Mounting Points:
The EC1 handle comes with two 1/4-20 mounts that are perfect for mounting accessories such as a light, microphone, or monitor. A 3/8-16 thread located on the bottom allows you to securely mount the EC1 to a tripod, jib, or dual handle support system such as the Ikan DGH.
Battery Life: 2-3 Hours
Battery Type: 3 x 3.7v Li-Ion 18650
Camera Compatibility: Most Mirrorless & DSLR Cameras