Skip to Content

RODE NTG-3B BLACK SHOTGUN CONDENSER MIC

Web Code: 464ADI058  •  Mfr Code: NTG3B
464ADI058.jpg
464ADI058-2.jpg
464ADI058-1.jpg
Only $929.99 CAD
 
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Call store to confirm:
 
Product Highlights
  • Super-cardioid Polar Pattern
  • Frequency Range: 40Hz - 20,000Hz
  • Wind Shield
Read More
 
 
  • Super-cardioid Polar Pattern
  • Frequency Range: 40Hz - 20,000Hz
  • Wind Shield
  • Microphone Clip
  • Designed for professional use on film, television, electronic news gathering and wherever high-resolution broadcast audio is required
  • Directional microphone that exhibits superlative audio quality with a rich, warm quality and a full frequency response
  • Its RF bias technology makes it almost completely resistant to moisture, making it the only option when recording in demanding environments where condensation is an issue
  • Machined from solid brass, the NTG3 is incredibly robust while remaining light weight
  • Its precise yet forgiving polar pattern ensures that whether used on-camera or on a boom pole, the NTG3 will capture audio clearly every time
  • A durable aluminum storage cylinder is supplied to provide the ultimate protection for the NTG3 while in storage and transport
  • Tightly sealed at both ends the cylinder is highly weatherproof, adding to the microphone's rugged performance credentials
  • Specifications:
  • Acoustic Principle: Line Gradient
  • Directional Pattern: Super-Cardioid
  • Frequency Range: 40Hz - 20,000Hz
  • Sensitivity: -30dB +-2dB re 1V/Pa @ 1kHz
  • Nominal Impedence: 25 ohms
  • Equivalent Noise: 13dBA SPL (A - weighted per IEC651)
  • Maximum Output: +8.2dBu (@ 1% THD into 1 k ohms)
  • Dynamic Range: 117dB (per IEC651)
  • Maximum SPL: 130dB (@ 1kHz, 1% THD into 1 k ohm load)
  • Signal/Noise: 81dB SPL (A - weighted per IEC651)
  • Power Req.: 48V Phantom Power (44-52V min 5mA)
  • Dimensions: Length - 255mm, Diameter - 19mm
  • Output Connection: 3 pin XLR, balanced output between Pin 2 (+), Pin 3 (-) and Pin 1 (ground)
  • Net Weight: 163g
  • Included:
  • NTG3 Shotgun Microphone
  • Water resistant aluminium storage cylinder (RCNTG3)
  • Wind shield (WSNTG3)
  • Zip pouch (ZP2)
  • Microphone clip (RM5)
 
 
 
loading
;
Back top top Skip to Navigation