RODE VIDEOMIC W/RYCOTE SUSPENSION
Web Code: 464ADI046 • Mfr Code: VMR
Only $189.99 CAD
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out.
Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Call store to confirm:
{{MyStoreData.Phone}}
Product Highlights
- Directional Video Condenser Mic
- Integrated Rycote Lyre Suspension
- High-Pass filter & Three-Stage Pad
You must complete all required fields.
Overview
- Directional Video Condenser Mic
- Integrated Rycote Lyre Suspension
- High-Pass filter & Three-Stage Pad
- Windscreen
- Record crystal clear audio to match the high definition video of today's cameras
- Designed for simplicity of operation
- Studio recording quality
- Condenser microphone
- 9V battery powered
- Two step High Pass Filter (Flat/80Hz)
- Three step PAD (0, =10, -20dB)
- Rugged reinforced ABS construction
- Windshield included
- 3.5mm mini-jack output
- Tight pickup area:
- Focus on the subject in front of the camera and reduce other surrounding noise with the VideoMic's highly directional super cardioid polar pattern
- Integrated Rycote Lyre Suspension:
- The integrated Rycote Lyre shock mounting isolates your microphone from bumps and vibrations that could otherwise interfere with your sound
- Constructed from a single piece of hard-wearing thermoplastic, the Lyre provides superior acoustic suspension to traditional elastic solutions, and will never wear out, sag or snap
- High-Pass filter & Pad:
- The High-Pass Filter setting acts to minimize distracting background noises appearing on your recording and a three-stage PAD allows the recording of loud sound sources such as concerts or motorsports
- High Pass Filter (80Hz)
- PAD: (-10/-20dB)
- VideoMic Specifications:
- Acoustic Principle: Line Gradient
- Frequency Range: 40Hz - 20,000Hz (selectable HPF@80Hz)
- Nominal Impedence: 200 ohms - phantom power
- Maximum Output: +6.9dBu (@ 1% THD into 1k ohms)
- Maximum SPL: 134dB (@ 1kHz, 1% THD into 1k ohms load)
- Power Req.: 9V alkaline battery (Current 5mA)
- Output Connection: 3.5mm mini-jack
- Directional Pattern: Super-Cardioid
- Sensitivity: -38dB +-2dB re 1V/Pa @ 1kHz
- Equivalent Noise: 20dBA SPL (A - weighted per IEC651)
- Dynamic Range: 114dB (per IEC651)
- Signal/Noise: 74dB SPL (A - weighted per IEC651)
- Dimensions: 250mmL x 102mmH x 65mmD
- Net Weight: 176g
- Also Included:
- WSVM windscreen
