FUJI EF-X20 TTL FLASH FOR X-PRO-1,SL1000
Web Code: 013FUJ003 • Mfr Code: 16241307
Authorized Dealer
Only $279.99 CAD
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out.
Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}} Check Other Stores
Call store to confirm:
{{MyStoreData.Phone}}
Henry’s Extended Life Plan
Yes! I’d like to add HELP to this item:
Extend the life of the Manufacturer’s Warranty by up to 3 years with Henry’s Extended Life Plan. Includes:
- Anti-Lemon Policy
- Global Coverage
- Transferable
- Much More!
Product Highlights
- Built-in Wide Diffuser
- Exposure Setting Dial
- Built-in Slave Mode
Overview
- Built-in Wide Diffuser
- Exposure Setting Dial
- Built-in Slave Mode
- Mounting Lock Releasing Button
- Compact and lightweight, yet offers a strong light intensity of guide number 20
- With the FUJIFILM's unique flash control technology "i Flash technology", it can automatically optimize the amount of light suitable to every shooting condition
- Crafted from premium metal materials to complement the design of the X-Series cameras
- Ergonomic design for responsive dial control
- Built-in wide diffuser can be selected by using lever on the side of the flash
- Built-in "Slave Mode" for advanced photography
- Exposure setting dial:
- Enables flash compensation from -1EV to +1EV in increments of 1/3 stops in the TTL Auto mode
- Enables flash output levels of 1/1, 1/2, 1/4, 1/8, 1/16, 1/32 and 1/64 in the Manual mode
- Immediate visual confirmation of settings even when the unit is turned OFF
- Lever for setting wide panel:
- Raise the lever to support a focal length of down to 20mm (35mm film equivalent)(*) * The guide number becomes 12
- Mounting lock releasing button:
- Featuring a mechanism that automatically locks the shoe-mount flash unit when it is placed on the hot shoe
- The mechanism firmly fixes the flash unit in place without operating the locking bar or tightening the screw, just easy attachment
- Wireless slave flash selector:
- To use the unit as a master flash, set the switch to X
- To use the unit as a slave flash, set the switch to N-MODE if the master flash is the "non-preflash" type, and P-MODE if the master flash is the "preflash" type
- The unit fires automatically upon detecting light from the master flash
- SPECIFICATIONS:
- Guide Number (ISO 100,m): 20 (12 when Wide panel is used)
- Color temperature: Approximately 5600K at full power
- Manual flash output: 1/1, 1/2, 1/4, 1/8, 1/16, 1/32, or 1/64
- Exposure compensation: +1 to -1 in increments of 1/3 EV
- Slave mode: Available (per-flash and non-pre-flash control supported)
- Power source: Two AAA alkaline or Ni-MH batteries
- Operating temperature: 0 degrees C to 40 degrees C (32 degrees F to 104 degrees F)
- Dimensions (H x W x D): 36.0 x 59.5 x 50.0mm (1.4 x 2.3 x 1.9in)
- Weight: Approximately 100g (3.5 oz), excluding batteries
- Compatibility:
- FinePix X100 / HS30EXR / HS33EXR / HS25EXR / HS28EXR / HS20EXR / HS22EXR / FUJIFILM X10, FUJIFILM X-S1, FUJIFILM X-Pro1
Specs
Flash Type:
External Flash Unit
Flash Mount:
Shoe
Guide No. (Feet/Metres):
20 ft./6.1m (ISO 100 at 50mm position)
Bounce Head:
None
Swivel Head:
None
Zoom Head:
None
Coverage:
20mm
Compensation:
+/- 1 EV in 1/3 EV Steps
Recycle Time:
5-6 sec. (approx.)
Effective Range:
N/A
Colour Temperature:
5600K
Power Source:
2 AAA Alkaline, Rechargeable Ni-MH Batteries
Dimensions (WxHxD):
1.4x2.3x1.9" (3.6x5.9x5.0cm)
Weight:
3.52 oz. (100g)
Additional Information
| Warranty: | 1 Year |
|---|
