Skip to Content


Web Code: 595NIK154  •  Mfr Code: 3613
Only $299.99 CAD
Low stock online.
In Stock - Usually ships in 24-48 hours but stock is low. Might take 3-4 days to ship out. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
Check Other Stores
Call store to confirm:
Product Highlights
  • FT1 Mount Adapter
  • Use F Mount Lenses
  • For Nikon 1 Cameras
Read More
  • FT1 Mount Adapter
  • Use F Mount Lenses
  • For Nikon 1 Cameras
  • Body Cap BF-1B
  • Rear Lens Cap LF-N1000
  • Allows NIKKOR F mount lenses to be used with Nikon 1 cameras equipped with a Nikon 1 mount
  • The angle of view of an F mount lens mounted on the FT1 is equivalent to that of a 35mm format lens with a focal length about 2.7 x longer
  • The FT1 can be used with more than 60 lenses, representing almost all the NIKKOR lenses currently on the market (*1)
  • It almost goes without saying that it also supports autoexposure/autofocus (*2) and vibration reduction (*3)
  • Electronic rangefinding is available in manual focus mode
  • You can also explore the new forms of expression offered by the Nikon 1's unique Motion Snapshot mode (*4)
  • *1: The adapter can be used with the following F mount NIKKOR lenses, including DX lenses but excluding IX-NIKKOR lenses, lenses for the F3AF, non-AI lenses, teleconverters, and auto extension rings. AI Nikkor 20mm f/2.8, AI Nikkor 24mm f/2.8, and PC-E NIKKOR 24mm f/3.5D ED lenses can not be used
  • *2: Autofocus is available only with AF-S lenses; other lenses support manual focus only. Set the camera focus mode to AF-S (the camera will not focus in other autofocus modes). The only AF-area mode available is Single-point AF and the camera focuses on the subject in the center focus point only
  • *3: Available with VR lenses
  • *4: Motion Snapshots can be recorded only when an AF-S lens is attached and AF-S (Single AF) is selected for focus mode and then only when the camera is in focus. Available only when autofocus is used with AF-S lenses
  • Specifications:
  • Type: Mount adapter
  • Supported cameras Nikon 1 interchangeable lens format digital cameras (Nikon 1 V1 supported from firmware version A 1.10/B 1.10, Nikon 1 J1 from firmware version A 1.10/B 1.10)
  • Dimensions: Approx. 61.5 mm diameter (excluding projections) x 42.5 mm
  • Weight: Approx. 150 g/5.3 oz
  • Supplied Accessories: Body Cap BF-1B, Rear Lens Cap LF-N1000

Average Customer Rating

0.0/5 based on 0 Review(s)
  • ({{rbd.NumberOfRatings}})
Back top top Skip to Navigation