Skip to Content

ZACUTO Z-FINDER PRO 3X (3" SCREEN)

Web Code: 586RES312  •  Mfr Code: DSLR
ZACUTO Z-FINDER PRO 3X (3" SCREEN)
586RES312-Z-FIND-PRO3-1.jpg
Was: $399.95 CAD
Now Only $149.50 CAD
SAVE $250.45
 
Special Order
Please order carefully, special orders are not returnable. Once your order is placed, it cannot be cancelled. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Call store to confirm:
The packaging of this clearance item may be in imperfect condition, however it will look/function as new. Standard return policy applies.
 
Product Highlights
  • Gorilla Plate
  • DSLR Short Body Frame
  • 3x Anti-Fog Coating Lens
Read More
 
 
  • Gorilla Plate
  • DSLR Short Body Frame
  • 3x Anti-Fog Coating Lens
  • 3 Extender Frames
  • Camera, Lens and Hood NOT included
  • Optical Viewfinders that allow DSLR cameras to have the correct form factor for video
  • Offers 3x focusable magnification (2.5x is available), a 40mm diameter Zacuto optical designed Anti-Fog lens, an eyecup preventing extraneous light leakage, a diopter and a field of view perfectly matched to 3" LCD screens
  • Diopter allows you to dial in the focus to match your eye
  • If you need extra focal point you can use the Z-Finder Extender Frames
  • Z-Finder Pro 3x has a diopter range of -2.75 and up (unlimited with extender frames)
  • These are semi-permanently stackable frames that attach to the skirt of the Z-Finder Pro and extends the Z-Finder glass further way from the LCD screen for people who are farsighted
  • Z-Finder Pro uses our Gorilla Baseplate and Z-Finder mounting frame to mount to the camera
  • Gorilla Baseplate attaches to the bottom of your camera using a ¼ 20" screw and the Z-Finder mounting frame attaches to the Gorilla Baseplate using thumb screws
  • Rubber back mounting frame does not attach to your LCD; it is held in place against your LCD with pressure. This method allows you to quickly remove the Z-Finder Pro by snapping it off the frame. If you want to remove the entire mounting frame from your camera, you can do so by loosening the thumb screws and pulling up on the metal mounting frame to release it
  • With the Z-Finder Pro, you are also a step closer to using one of our Gorilla Support Rigs, as they use the same baseplate as the base
  • Please Note: If you are using a battery grip on your small bodies DSLR camera, you will need this battery grip frame. If you have a taller body camera like the Canon 1D Mark IV you will need the tall body frame
  • Warnings:
  • Z-finder is a magnifier and as such will magnify the sun and could damage the LCD screen if the sun is allowed to shine directly through the Z-finder lens. This is not a defect but a physical property. Caution should be taken to avoid sun magnification
  • Tapped holes on the bottom of the Gorilla plate are offset from the center of the lens. This is only a concern if you are using the Gorilla plate with other rigs that need the matte box in line with the lens/mounting screw hole
  • Z-Finder Pro includes:
  • 3 Extender Frames
  • Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D type cameras)
  • Lens Cap & Protective Boot
  • Lanyard Hook and Lanyard
  • 3x Anti-Fog Coating Lens
 
 

What’s Included:

  • 3 Extender Frames
  • Gorilla Plate with DSLR Short Body Frame (Canon 5D/7D type cameras)
  • Lens Cap & Protective Boot
  • Lanyard Hook and Lanyard
  • 3x Anti-Fog Coating Lens
  •  
     
     
    loading
    ;
    Back top top Skip to Navigation