Skip to Content


Web Code: 125DAY058  •  Mfr Code: PWMININ
Was: $250.00 CAD
Now Only $179.50 CAD
SAVE $70.50
Only available in store
Only available in store Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
Call store to confirm:
The packaging of this clearance item may be in imperfect condition, however it will look/function as new. Standard return policy applies.
Product Highlights
  • PocketWizard Radio
  • Locks onto the Camera's Hot Shoe
  • Easy to Use
Read More
You must complete all required fields.
  • PocketWizard Radio
  • Locks onto the Camera's Hot Shoe
  • Easy to Use
  • Works w/Remote PocketWizard Units
  • 340.00 - 354.00 MHz, US FCC / IC Frequency
  • 433.42 - 434.42 MHz, CE Frequency
  • PocketWizard radio providing i-TTL and power control capabilities with Nikon Speedlights and select studio lights
  • Your creativity also extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities
  • The MiniTT1 locks onto the camera's hot shoe, supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units
  • Remotes can be one or more PocketWizard FlexTT5 Transceivers (Sold Separately) connected to Nikon CLS / i-TTL flashes (Sold Separately) or any PocketWizard Receiver for triggering flash or remote cameras
  • The MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot
  • ControlTL:
  • PocketWizard's newest firmware platform taps into the camera's digital communications to enable an entirely new level of remote flash capability through our proven radio system
  • ControlTL allows remote i-TTL for Nikon CLS / i-TTL systems as well as Manual Power Control
  • ControlTL firmware is configurable and upgradeable for "future-proof" continuous improvement
  • Dedicated CLS / i-TTL Triggering:
  • Locking your MiniTT1 Transmitter into the hot shoe of a Nikon DSLR camera, and mounting CLS / i-TTL flashes onto FlexTT5 Transceivers (Sold Separately) gives you full flash exposure control with the freedom and reliability of a PocketWizard radio
  • There are no special settings to make or modes to call up
  • Use the camera's flash exposure controls for basic control of remote flashes, or add an AC3 ZoneController (Sold Separately) or Nikon Master unit (Sold Separately) for even more flexibility
  • Manual Power Control:
  • Adjust the manual power settings of your remote Nikon Speedlights (Sold Separately) directly from a AC3 ZoneController, SB-800 or SB-900 flash (Sold Separately) mounted on your on-camera MiniTT1 or FlexTT5 (Sold Separately)
  • You can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting simply through the user interface on the back of the SB-800 or SB-900 (Sold Separately) or with the dials of the AC3 ZoneController (Sold Separately)
  • Now you can work with total control with your remote lights, without leaving your shooting position
  • Nikon SU-800 Wireless Speedlight Commander (Sold Separately) may also be used
  • High Speed Sync (Auto FP):
  • The MiniTT1 makes Nikon's FP/HSS mode a lot more functional with the freedom of radio
  • Now you can use your i-TTL speedlights (Sold Separately) in FP sync all the way to 1/8000 in the middle of the day in bright sun!
  • ControlTL gains faster recycling times and more flashes per set of batteries when shooting in Nikon's FP / HSS Flash mode Use this feature to shoot wide open in bright sun for amazing results
  • HyperSync:
  • HyperSync technology allows photographers to achieve faster X-sync speeds, sometimes up to 1/8000 of a second, with full power flash
  • Now you can cut the ambient light and use wide-open apertures, outdoors in bright sunlight
  • HyperSync automatically adjusts the timing of your flash trigger so that faster than X-sync speeds can be achieved
  • With certain Canon camera and flash combinations, you can achieve sync all the way to 1/8000th of a second
  • Just imagine what you can do using flash in bright sun with wide open apertures and fast shutter speeds
  • Since HyperSync is a trigger function you can use any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX (Sold Separately)
  • HyperSync works with both TTL speedlites and full size studio flash
  • While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any set-up
  • HyperSync Automation:
  • With ControlTL Firmware Update 3.0 (Nikon) and 6.0 (Canon), configuring HyperSync has now been automated
  • HyperSync Automation adjusts HyperSync timing in two separate places - on the transmitter and on the receiving ControlTL radio
  • The transmitting or on-camera MiniTT1 or FlexTT5 (Sold Separately) automatically adjusts HyperSync to compensate for changes made to shutter speed
  • Photographers can further refine HyperSync via the PocketWizard Utility
  • For more information on Configuring HyperSync Automation, visit the HyperSync section of the PocketWizard Wiki
  • High Speed Sync (HSS / FP Sync) Disable Mode:
  • Select either HSS Sync or HyperSync at shutter speeds above x-sync
  • This allows you to use HyperSync and the benefit of full power flash all the way up to 1/2000 with certain flash systems
  • Rear Curtain Sync:
  • Precise rear curtain sync capability is engaged using the camera's sync settings
  • Capture natural light trails with sharp exposures at the end - no "after trails!"
  • Pre-Flash Boost:
  • Nikon flashes use a dual preflash system to calculate i-TTL exposure values
  • In many TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see
  • PocketWizard's Pre-Flash Boost increases your remote Nikon flashes first preflash by three stops and, if necessary, the second preflash by one stop
  • The boost level can also be adjusted at the flash if necessary
  • PowerTracking:
  • When working with certain manual flashes, you can change any of your settings on your camera and the system adjusts for those changes
  • Change your camera's exposure compensation to adjust the flash output, or make adjustments in aperture or ISO and the system balances your flash for proper exposure
  • Built-in Hot Shoe:
  • Lock your Nikon flash into the MiniTT1's dedicated hot shoe and combine your remote flash with on-camera flash or use the on-camera flash for additional CLS / i-TTL or Manual Power Control only
  • The metal and glass reinforced resin hot shoe assembly is a superstructure onto itself and incredibly durable
  • The best part; no more cords
  • Basic Trigger Mode:
  • Allows the MiniTT1 or FlexTT5 (Sold Separately) to work as a transmitter on ANY camera it will fit
  • Anyone looking for the small form factor of the MiniTT1 can use it on other DSLRs, SLRs or even medium format cameras with standard hot shoes
  • PocketWizard Compatible:
  • The MiniTT1 sends out two trigger signals; one on the new ControlTL channels, and another on the same channels as all standard trigger PocketWizard radios so they will work with any unit you may already have
  • PocketWizard Utility Programmable and Upgradeable:
  • Use the supplied PocketWizard Utility software with the on-board USB port to program the MiniTT1 to any PocketWizard channel and zone as well as many other custom settings
  • The MiniTT1 can be upgraded whenever updates and feature enhancements are available
  • Channels / Learn Mode:
  • The MiniTT1 has two channel configuration settings; C1 and C2
  • Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography
  • Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings
  • * 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios
  • ** 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios
  • ZoneControl:
  • Add the AC3 ZoneController on top of your MiniTT1 for Nikon and gain three zones of power control right from the camera's position
  • Works in both auto/CLS/i-TTL and manual
  • Shut down an entire zone with the flick of a switch
  • AC3 ZoneController sold separately
  • SpeedCycler with an AC3 ZoneController:
  • Previously only seen with PocketWizard's MultiMAX radios, this new mode is designed to rapidly cycle through multiple flash units fired individually in sequence
  • This allows photographers to fire a camera in sync with flashes faster than a single flash unit can recycle
  • It can also be used for triggering remote cameras sequentially
  • SpeedCycler is engaged on a transmitting MiniTT1 or FlexTT5 (Sold Separately) via the PocketWizard Utility
  • SpeedCycler mode requires an AC3 ZoneController (Sold Separately) in the top hot-shoe of the on-camera PocketWizard radio
  • Zones A, B, and C will be triggered sequentially and individual zones can be disabled by setting the AC3's Zone Switch to the off position
  • Both TTL and manual flash controls are supported
  • Flash Power Control without a Camera:
  • Photographers can now take their AC3 and transmitting radio off-camera and use it to set power levels for any flash with a ControlTL receiver, making it more convenient to use an optically triggered light meter, or control the power levels with just a MiniTT1/FlexTT5 and AC3 (Sold Separately) in their hand while another photographer takes the pictures
  • Previously, an AC3 ZoneController on a MiniTT1 or FlexTT5 (Sold Separately) needed to be on camera to send manual power levels to remote flashes
  • Now, when connected to a MiniTT1 or FlexTT5 (Sold Separately), manual power levels are transmitted to remote flashes when the TEST button is pressed even when the transmitter is off the camera
  • This affects both speedlights connected to receiving FlexTT5s and larger flashes like AlienBees and Elinchrom RX units (Sold Separately) with ControlTL receivers
  • Continuous Fast FPS:
  • Never before have you been able to shoot remote CLS / i-TTL non-stop in continuous high-speed mode
  • Fill the buffer! Nothing else comes close
  • Low-Profile Design:
  • The lay-flat design with integrated hot shoe and internal antenna keeps a very low profile on your camera
  • Powered by a CR2450 lithium coin cell battery
  • Auto Trigger Select for ControlTL:
  • The hot shoe on both the MiniTT1 and Flex TT5 (Sold Separately) will trigger just about any hot shoe flash placed into it in addition to the Nikon Speedlight's it is designed for
  • You can now fire just about any hot shoe flash including Vivatar, Canon, etc., in manual mode only and not TTL mode
  • TTL Compatibility: Nikon CLS / i-TTL
  • Frequency: 340.00 - 354.00 MHz US FCC / IC; 433.42 - 434.42 MHz CE
  • Channels: 52 Channels over 26 Frequencies (FCC/IC); 35 Channels over 5 Frequencies (CE)
  • Antenna: Internal
  • Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
  • Range Performance: Up to 800 feet (10 to 240 meters) for CLS / i-TTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables
  • Mounting: Hot shoe only
  • Maximum Shooting Rate*: TTL Mode: within approximately 1 FPS of camera's maximum FPS; Basic Trigger Mode: Camera Max FPS (* dependent on flash power settings, FPS = Frames Per Second)
  • Power / Channel Switch: OFF - C.2 - C.1
  • Status Indicator: LED, Green, Amber, Red status indications
  • Voltage Present: 3.3 VDC (all pins) - safe for all cameras
  • Hot Shoe voltage protection: Hot Shoe: up to 50V
  • USB: USB Compliant 2.0, Mini-B Connector
  • Operating Temperature: above -15C (5 F) and below 50 C (120 F)
  • Storage Temperature (without battery): above -30 C (-22 F) and below 85 C (185 F)
  • Construction: High impact plastic, captive battery door; Hot shoe made of glass reinforced resin
  • Power: 3 V Lithium battery, CR2450 (included) or CR2354 Lithium coin cell type
  • Battery Life: 30 - 50 hours of camera "awake time" depending on shooting habits
  • Dimensions: 2.8" (7.1 cm) long x 1.9" (4.9 cm) wide x 1.3" (3.3 cm) tall
  • Weight: 2.3 oz (65 grams), 2.0 oz (57 grams) without battery
  • ROHS Compliant
  • MiniTT1 Transmitter
  • USB cable
  • CR2450 battery
  • Quick Guide
  • MiniTT1 for Nikon is compatible with these modern Nikon Digital SLR cameras capable of using Nikon's latest i-TTL / CLS protocol:
  • D3x, D3s, D3, D2x
  • D700, D300, D300s, D200
  • D90, D80, D40x, D40
  • D7000, D5000, D3000
  • MiniTT1 Nikon is compatible with the following modern Nikon Speedlights as Remote flashes and Nikon On-Camera Master flashes:
  • (Other flashes may work in "Basic Trigger Mode" without CLS / i-TTL.)
  • Nikon Speedlights as Remotes: SB-400, SB-600, SB-700, SB-800, SB-900
  • Nikon On-Camera Master Flashes: SB-800, SB-900, SU-800
  • NOTE: Nikon D3100 - camera has initial feature compatibility built into the firmware and will function well in normal sync modes however a future firmware update will be released shortly to improve timing capabilities with Rear Curtain Sync and add other compatibility improvements
  • Nikon SB-700 flash - is now compatible
  • MiniTT1 for Nikon is currently NOT compatible with these Nikon cameras:
  • D1, D1x, D1h, D2h, D2hs, D2xs
  • D100
  • D70, D70s, D60, D50
  • Coolpix and Film-based cameras
  • MiniTT1 for Nikon is currently NOT compatible with the following Nikon flashes as Remote Units:
  • Any older generation Nikon Flashes as Remote Units Such as: SB-80DX; SB-80; SB-28DX; SB-28; SB-50

What’s Included:

  • MiniTT1 Transmitter
  • USB cable
  • CR2450 battery
  • Quick Guide
    Back top top Skip to Navigation