Skip to Content


Web Code: 125DAY057  •  Mfr Code: PWMINIC
Was: $250.00 CAD
Now Only $179.50 CAD
SAVE $70.50
In Stock
Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
Call store to confirm:
The packaging of this clearance item may be in imperfect condition, however it will look/function as new. Standard return policy applies.
Product Highlights
  • Wireless Trigger Control
  • Locks onto the Camera's Hot Shoe
  • Works with Remote PocketWizards
Read More
You must complete all required fields.
  • Wireless Trigger Control
  • Locks onto the Camera's Hot Shoe
  • Works with Remote PocketWizards
  • For Canon E-TTL II Flashes
  • MiniTT1 Transmitter locks onto the camera's hot shoe supporting an on-camera flash with its own hot shoe while working with remote PocketWizard units
  • Remotes can be one or more PocketWizard FlexTT5 Transceivers connected to Canon E-TTL II flashes or any PocketWizard Receiver for triggering flash or remote cameras
  • MiniTT1 Transmitter is easy to use; just slide in place and begin to shoot
  • PocketWizard ControlTL System interprets the complex E-TTL II data being sent through the camera's hot shoe and digitally transmits it in a reliable radio signal
  • Change the flash compensation dial on the camera, and those commands pass seamlessly through the system to your remote flash
  • Adjust your shutter speed, aperture or ISO and the system corrects for those changes
  • A ratio command set on the flash or command unit passes through the MiniTT1 to set the remotes PocketWizard ControlTL radio communication allows you to shoot farther, faster, around corners, through walls even at high noon in bright daylight
  • Now you can deploy a wireless flash system wherever you want, without infrared limitations, in seconds
  • Use the MiniTT1 for standard triggering with any PocketWizard Receiver including the FlexTT5, PlusII or MultiMAX
  • When used this way with a digital camera, you can take advantage of PocketWizard's HyperSync Technology that allows up to 1/500th of a second camera sync with many camera/strobe set-ups HyperSync allows you to advance the timing of your flash trigger so that faster than X-sync speeds can be achieved
  • Push your ControlTL system beyond 1/500th and go into FP/High-Speed sync mode automatically-No buttons to press or settings to change other than your shutter speed will give you flash sync all the way to 1/8000th
  • PocketWizard Utility program is provided to support the MiniTT1 via a USB port
  • Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers and update your product to the latest firmware
  • Dimensions - 7.1cm x 4.8cm x 3.3cm / 2.8 x 1.9 x 1.3"
Back top top Skip to Navigation