Skip to Content


Web Code: 125DAY056  •  Mfr Code: PWFLEXN
Only $279.99 CAD
Limited Stock
Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
Call store to confirm:
Product Highlights
  • ControlTL Radios with i-TTL
  • Dedicated CLS / i-TTL Triggering
  • Manual Power Control
Read More
  • ControlTL Radios with i-TTL
  • Dedicated CLS / i-TTL Triggering
  • Manual Power Control
  • Basic Trigger Mode
  • Remote power control for Nikon Speedlights, and select studio lights
  • Your creativity also now extends far beyond X-Sync speeds with HyperSync and FP Sync capabilities
  • With its built in hot-shoe, ControlTL firmware and transceiver function, the FlexTT5 is the perfect addition to Nikon CLS / i-TTL flash system and takes the Nikon CLS system beyond the boundaries of infrared technology. When paired with the MiniTT1 Transmitter or another FlexTT5 Transceiver, a whole new world of wireless flash freedom opens up
  • FlexTT5 is also the perfect Transceiver for your manual triggering needs and works with all MultiMAX channels and many of the MultiMAX advanced functions
  • FlexTT5's simple design comes to life through its hot-shoe connection with a camera or flash
  • On camera, the FlexTT5 works identically to the MiniTT1 with the convenience of AA batteries. The system tracks your changes in ISO and aperture and reacts accordingly to make sure exposures stay right on target. Use the exposure compensation dial on your camera to remotely adjust your flash output. Mount a flash or command unit on the FlexTT5 to use the same zone controls as you would normally. Slip in the AC3 ZoneController for Nikon and use its simple interface to control three zones of lights
  • With PocketWizard's HyperSync Technology, the FlexTT5 can precisely advance the timing of your flash trigger so that increased flash sync speeds, up to 1/500th of a second is achievable with many strobes
  • Push your ControlTL system beyond 1/500th and go into High Speed Sync /FP mode automatically. Simply change your shutter speed to get flash sync all the way to 1/8000th. No buttons to press or settings to change!
  • Under a remote flash, the FlexTT5 is your seamless connection to remote power control
  • Select one of three zones, and add as many lights to each zone as you like
  • Run one zone in manual and another in i-TTL and control it all from your camera
  • Place your flashes where you want to; hide them or use them in bright daylight
  • More FlexibilityUse the FlexTT5's camera sync port to trigger a remote camera
  • Use the flash port to trigger any manual flash
  • FlexTT5 also has our Auto-Sensing Transceiver Technology that enables it to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job
  • When a hot-shoe or other trigger is detected, it automatically switches to Transmitter mode
  • With Auto Relay Mode you can easily trigger a remote camera in sync with remote flash
  • Put a camera where you can?t be and use remote TTL or manual lighting at the same time
  • Expand your coverage and increase your creativity
  • FlexTT5 has two channel configuration settings; C1 and C2:
  • Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography, or 32 standard channels** for manual flash photography. The FlexTT5 Transceiver also has a three-zone selector switch for ease of use with Nikon zones and ratios.
  • * - 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios
  • ** - 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios
  • PocketWizard Utility download: is provided to support the FlexTT5 Transceiver via a USB port
  • Utility allows you to configure your channel settings, dial in your HyperSync timing, adjust your sleep-mode timers as well as update your product to the latest firmware
  • Features:
  • ControlTL: PocketWizard?s firmware platform taps into the camera?s digital communications to enable an entirely new level of remote flash capability through our proven radio system. ControlTL allows remote i-TTL for Nikon CLS / i-TTL systems as well as Manual Power Control. ControlTL firmware is configurable and upgradeable for "future-proof" continuous improvement
  • Dedicated CLS / i-TTL Triggering: Locking your FlexTT5 Transceiver into the hot shoe of a Nikon DSLR camera, and mounting CLS / i-TTL flashes onto FlexTT5 Transceivers gives you full flash exposure control with the freedom and reliability of a PocketWizard radio. There are no special settings to make or modes to call up. Use the camera?s exposure compensation controls for basic control of remote flashes, or add an AC3 ZoneController or Nikon Master unit for even more flexibility
  • Manual Power Control: Adjust the manual power settings of your remote Nikon Speedlights directly from a SB-800, SB-900 flash or PocketWizard AC3 ZoneController mounted on your on-camera FlexTT5. Working with a Nikon SB-800, SB-900 or AC3 in the shoe of the FlexTT5, you can independently control the power output of up to three remote groups of lights (you can have as many lights in each group as you want) from full power down to the lowest setting. Now you can work with total control with your remote lights, without leaving your shooting position. Nikon SU-800 Wireless Speedlight Commander may also be used
  • Zone Select: FlexTT5 Transceiver has an A-B-C zone select switch to allow use with the remote groups/zones found on on the PocketWizard AC3 ZoneController or Nikon flashes. Zones allow you to control single or groups of lights independently from other lights in different zones. These zones can also be used with a MuiltiMAX thus allowing you to pair a single MultiMAX radio on camera with FlexTT5's Transceivers on your remote flashes and utilize many of the MultiMAX's advance trigger functions
  • HyperSync: HyperSync technology allows photographers to achieve faster X-sync speeds, up to 1/500th of a second, with full power flash. That extra speed can be used to freeze action or cut ambient light - both of which can produce results never possible before. HyperSync works with both TTL speedlights and full size studio flash. All you need is a MiniTT1 or FlexTT5 on camera that has been tuned to your specific camera and flash via the PocketWizard Utility. While performance varies by the camera and flash equipment being used, HyperSync will get the maximum possible out of any set-up
  • High Speed Sync / FP: When HyperSync can't keep up, FP/High Speed Sync takes over for Speedlight flash photography all the way to 1/8000. Use this feature to shoot wide open in bright sun for amazing results. ControlTL optimizes this amazing feature by shortening the flash burst to the precise amount needed resulting in faster recycling times and more flashes per battery set when shooting in Nikon's HSS/FP Flash mode
  • High Speed Sync (HSS / FP Sync) Disable Mode: Select either HSS Sync or HyperSync at shutter speeds above x-sync. This allows you to use HyperSync and the benefit of full power flash all the way up to 1/8000 with certain flash systems
  • Rear Curtain Sync: Precise rear curtain sync capability is engaged using the camera's sync settings. Capture natural light trails with sharp exposures at the end - no "after trails!"
  • Pre-Flash Boost: Nikon flashes use a dual preflash system to calculate i-TTL exposure values. In many TTL situations, including shooting in full sun, over long distance or using diffusers or bounce flash, the normal pre-flash is simply not enough for the camera to see. PocketWizard's Pre-Flash Boost increases your remote Nikon flashes first preflash by three stops and, if necessary, the second preflash by one stop. The boost level can also be adjusted at the flash if necessary
  • PowerTracking: When working with the PowerST4, PowerMC2 and AC9/FlexTT5 paired with compatible manual flashes, you can change any of your settings on your camera and the system adjusts for those changes. Change your exposure compensation to adjust the exposure or make adjustments in aperture or ISO and the system balances your flash for proper exposure
  • Basic Trigger Mode: Allows the FlexTT5 to work as a transmitter on ANY camera it will fit
  • PocketWizard Compatible: The MiniTT1 sends out two trigger signals; one on the ControlTL channels, and another on the same channels as all standard trigger PocketWizard radios, so they will work with any unit you may already have
  • PocketWizard Utility - Programmable and Upgradeable: Use the supplied PocketWizard Utility software with the on-board USB port to program the FlexTT5 to any PocketWizard channel and zone as well as many other custom settings. The FlexTT5 can be upgraded whenever updates and feature enhancements are available (many planned!)
  • Auto-Sensing Transceiver Technology: PocketWizard's Auto-Sensing Transceiver Technology enables the FlexTT5 Transceiver to switch back and forth between Transmitter and Receiver modes as needed for greater flexibility on the job. All PocketWizard Transceivers default to Reciever mode. When a hot shoe or other trigger is detected, it automatically switches to Transmitter mode
  • Auto-Relay Mode: Easily trigger a remote camera in sync with distant remote flashes with Auto-Relay Mode. Put a camera where you can't be and have remote TTL or manual lighting at the same time. Expand your coverage and increase your creativity
  • Channels / Learn Mode: The FlexTT5 has two channel configuration settings; C1 and C2. Each can be programmed as needed with up to 20 ControlTL channels* for TTL photography or Manual Power Control, or 32 standard channels** for manual flash photography. Channels can be configured with the PocketWizard utility or use the Learn function to quickly program channels, or the reset function to configure back to factory settings
  • * - 20 ControlTL channels for FCC/IC 344 MHz radios and three ControlTL channels for CE 433 MHz radios
  • ** - 32 Standard channels for FCC/IC 344 MHz radios and 35 Standard channels for CE 433 MHz radios
  • ZoneControl: Add the AC3 ZoneController on top of your FlexTT5 and gain three zones of power control right from the camera?s position. Works in both auto/CLS/i-TTL and manual. Shut down an entire zone with the flick of a switch. AC3 ZoneController sold separately
  • Camera/Flash Ports: The FlexTT5 Transceiver has two plug-in ports for use with remote CLS / i-TTL cameras and other flash units, including studio strobes. With its auto-relay function, the FlexTT5 can trigger a remote camera and transmit to a remote strobe
  • Continuous Fast FPS: Never before have you been able to shoot remote CLS / i-TTL non-stop in continuous high-speed mode. Fill the buffer! Nothing else comes close
  • Low-Profile Design: FlexTT5 lies flat, stays out of the way and features a flip-up antenna for additional range when needed
  • Auto Trigger Select for ControlTL: The hot shoe on both the MiniTT1 and Flex TT5 will trigger just about any hot shoe flash placed into it in addition to the Nikon Speedlight's it is designed for. Yes, you can now fire just about any hot shoe flash including Vivatar, Canon, etc., in manual mode only and not TTL mode. (max trigger voltage < 50V, use P2 port for up to 200V)
  • Built-in Hot Shoe: Lock your Canon flash into the FlexTT5?s dedicated hot shoe and combine your remote flash with on-camera flash or use the on-camera flash for additional CLS / i-TTL or Manual Power Control only. The metal and glass reinforced resin hot shoe assembly is a superstructure onto itself and incredibly durable. The best part; no more cords
  • Continuous Remote Camera Triggering: This allows for triggering a continuous motor drive burst of a camera connected to the P1 port on a remote FlexTT5
  • Transmit Only Mode: This prevents an incoming trigger signal firing your on-camera FlexTT5 and flash, in situations where multiple photographers are using the same set of remote PocketWizard radios
  • Specifications:
  • TTL Compatibility: Nikon i-TTL
  • Frequency: 340.00 - 354.00 MHz US FCC / IC; 433.42 - 434.42 MHz CE
  • Channels: 52 Channels over 26 Frequencies (FCC/IC); 35 Channels over 5 Frequencies (CE)
  • Antenna: 2.7" (6.9 cm) rubberized with 180 degree swing
  • Transmit output power: Less than 0.001 watt (1/1000 of a watt or 1 milliwatt)
  • Range Performance: Up to 800 feet (10 to 240 meters) for i-TTL triggering depending on flash used, antenna orientation and other variables. Up to 1200 feet (10 to 365 meters) for basic triggering depending on flash used, antenna orientation and other variables.
  • Mounting: Hot Shoe, 1/4-20, lanyard, velcro
  • Maximum Shooting Rate Frames per second (fps): TTL Mode: within 1 FPS of camera's maximum FPS; Basic Trigger Mode: Camera Max FPS. * dependent on flash power settings (FPS = Frames Per Second)
  • Power / Channel Switch: OFF - C.2 - C.1
  • Zone Select Switch: A-B-C (matches Nikon zones)
  • Status Indicator: LED: Green, Amber, Red status indications
  • Camera / P1 Port: 1/8" (3.5 mm) stereo miniphone for 2-stage remote camera triggering. Port Voltage Handling: up to 50 Volts, 100 milliamp continuous (Tip = Trigger; Ring = Pre-Trigger; Sleeve = Ground)
  • Flash / P2 Port: 1/8" (3.5 mm) mono miniphone. Port Voltage Handling: up to 200 Volts, 4 amps peak, 250 milliamp continuous, non-polarized
  • Minimum Receive Contact Time: Camera / P1 Port = 80 milliseconds; Flash / P2 Port = 500us
  • Voltage Present: 3.3 VDC (all pins) - safe for all cameras
  • Hot Shoe voltage protection: Hot Shoe: up to 50V
  • USB: USB Compliant 2.0, Mini-B Connector, 5VDC regulated, 100mA, Pin 1 Positive, Pin 4 Ground
  • Operating Temperature: Above -15° C (5° F) and below 50° C (120° F).
  • Storage Temperature (without battery): Above -30 C (-22 F) and below 85 C (185 F)
  • Construction: High impact plastic, captive battery door
  • Hot Shoe made of glass reinforced resin
  • Power: Two (2) AA (IEC:LR6) Alkaline recommended, other chemistries (NiMH, NiCAD, Lithium) allowed, USB
  • Battery Life: 60 + Hours
  • Dimensions: 3.6" (9.2 cm) long x 2.9" (7.3 cm) wide x 1.4" (3.6 cm) tall, antenna lowered
  • Weight: 5.4 oz (153 grams) 3.8 oz (108 grams) without batteries
  • ROHS Compliant
  • Compatibility:
  • FlexTT5 for Nikon are compatible with these modern Nikon Digital SLR's cameras capable of using Nikon's latest i-TTL / CLS protocol:
  • D3x, D3s, D3, D2x
  • D700, D300, D300s, D200
  • D90, D80, D40x, D40
  • D7000, D5000, D3000
  • NOTE: Nikon D3100
  • Camera has initial feature compatibility built into the firmware and will function well in normal sync modes however a future firmware update will be released shortly to improve timing capabilities with Rear Curtain Sync and add other compatibility improvements
  • FlexTT5 for Nikon are currently NOT compatible with these Nikon cameras:
  • D1, D1x, D1h, D2h, D2hs, D2xs
  • D100
  • D70, D70s
  • Coolpix and Film-based cameras
  • FlexTT5 for Nikon are compatible with the following modern Nikon Speedlights as Remote flashes and Nikon On-Camera Master flashes:
  • (Other flashes may work in "Basic Trigger Mode" without CLS / i-TTL.)
  • Nikon Speedlights as Remotes: SB-400, SB-600, SB-800, SB-900
  • Nikon On-Camera Master Flashes: SB-800, SB-900, SU-800
  • Nikon SB-700 flash - currently being researched, and should be addressed in a future firmware update
  • FlexTT5 for Nikon are currently NOT compatible with the following Nikon flashes as Remote Units:
  • Any older generation Nikon Flashes as Remote Units Such as: SB-80DX; SB-80; SB-28DX; SB-28; SB-50
  • Basic Trigger Mode:
  • Note that almost all cameras and flashes are compatible with the FlexTT5 when the radios are configured for Basic Trigger Mode. Basic Trigger Mode disables ALL power controlling and TTL functions of the radios
  • Included in the box:
  • FlexTT5 Transceiver, USB cable, Two (2) AA batteries, Quick Guide
Back top top Skip to Navigation