Skip to Content

BOWENS RADIO TRIGGER PULSAR BW5150

Web Code: 372BWN284
BOWENS RADIO TRIGGER PULSAR       BW5150
Only $219.99 CAD
 
Special order item.
Special order - This item is not stocked in any of our stores. This item is available from our supplier but please order carefully, special orders are not returnable. Once your order is placed, it cannot be cancelled. Delivery time from supplier average 7-14 business days assuming our supplier has stock. Sorry, we cannot guarantee delivery times for any special order item. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
{{MyStoreData.Address}}
Check Other Stores
Call store to confirm:
 
Product Highlights
  • Radio Transmitter/Receiver
  • 4-Channels
  • 100m Range
Read More
 
 
  • Radio Transmitter/Receiver
  • 4-Channels
  • 100m Range
  • Low Voltage Trigger
  • Radio Transmitter: Pulsar can trigger devices around corners and through walls
  • 100m Range: Pulsar allows photographers to work further distances from their light source
  • Long Battery Life: Expect to enjoy over 200 hours of continuous use from your Pulsar
  • Transceiver: Pulsar can be a transmitter or receiver at the touch of a switch
  • Low voltage operation: Pulsar operates at just 3v perfect for use with sensitive digital cameras
  • Multifunctional Device:
  • Can be used to trigger flash units, film and digital cameras and light meters for up to 100 meters
  • Because it uses radio transmission, rather than IR, it allows for triggering around corners, through walls and is not affected by high ambient light situations
  • Features:
  • Choose from four individual channels and six studio selectors, each providing a unique ID for a different flash device or combine them to trigger all equipment within a given setup or studio
  • Pulsar also features a hot-shoe mount, sync in and sync out terminals, a ready indicator, a test button and an external power option
  • Low-voltage operation:
  • Due to its ow-voltage operation, it is suitable for digital cameras
  • It can be used as either a transmitter or receiver and operates off of two AAA batteries
  • Radio instead of IR Transmission:
  • Allows it to trigger around corners and through walls
  • It is also unaffected by high ambient light orlow-light situations
  • The Pulsar's low-voltage operation takes the fear out of connecting an expensive digital camera to a high voltage studio lighting system
  • Other Features:
  • Co-axial PC sync out connection that allows photographers to use their existing sync leads, a DC input socket that allows for long term installations, and a test button that will allow the Pulsar to be tested without shooting any pictures
  • Pulsar is Two Units in One:
  • an be switched to either Tx (transmitter) or Rx (receiver) mode
  • Once switched on, the indicator lamp on top of the unit will blink approximately every three seconds to show that the unit is working
  • This same LED will light to show when the unit is transmitting or receiving a signal
  • The LED also acts as a low battery warning and double blinks when the batteries need changing
  • Attaching to a Flash Unit:
  • To physically attach the Pulsar, when it's being used in receiver mode, to a flash unit, a bungee cord and connector plate are included
  • Using the elastic cord, the plate can be attached to the light unit or stand
  • The hot shoe slides onto the connector plate and is locked into position, providing a simple, effective and safe design
  • Specifications:
  • Range: 100 meters
  • Frequency: 433MHz
  • Batteries: 2 x AAA, MN2400 or LR03
  • Dimensions: 3.54" (L) x 193" (W) x 1.73" (H) / 90mm (L) x 49mm (W) x 44mm (H)
  • Weight: 4.30 oz / 122g.
  • In the Box:
  • One Multi-functional Pulsar Transceiver
  • Universal Bracket
  • PC Cord
  • Jack Adapter
  • 2 AAA Batteries
 
loading
Back top top Skip to Navigation