Skip to Content


Web Code: 137RES157  •  Mfr Code: PLAN1
Only $13.99 CAD
Special order item.
Special order - This item is not stocked in any of our stores. This item is available from our supplier but please order carefully, special orders are not returnable. Once your order is placed, it cannot be cancelled. Estimated delivery time is 3-4 weeks (Assuming our supplier has stock). Sorry, delivery time is subject to availability and we cannot guarantee delivery times for any special order item. Additional shipping charges may apply.
{{MyStoreData.Status}} at Henry's {{MyStoreData.StoreName}}
Call store to confirm:
Product Highlights
  • Low-Profile Anchor Mount
  • Twist Resistant
  • Rugged, Weatherproof
Read More
  • Low-Profile Anchor Mount
  • Twist Resistant
  • Rugged, Weatherproof
  • Works with Other Straps
  • Attach your Peak Design strap (or any standard OEM neck/hand strap) directly to the bottom of your camera in the most low-profile, unobtrusive way possible. Unlike a tripod plate, Anchor Mount is so small and slim that it won't hinder access to battery compartments or flip screens. Plus, when you connect one end of your strap to Anchor Mount your camera will hang with the lens facing downward - this gives you far more stability and comfort when using longer lenses. Ultra-strong machined/anodized aluminum construction. Note that Anchor Mount is not tripod or Capture compatible.
  • 1 on the SIDE, 1 on the Bottom:
  • We often recommend attaching 1 end of your PD strap to your camera's side strap lug (opposite the grip) and the other end to the bottom. These 2 connection points let the camera hang with the lens facing down for greater comfort and stability, especially with longer primes and zooms. Anchor Mount is the most low-profile, unobtrusive connection point available for PD Anchors and standard camera straps.
  • Works with All PD Straps:
  • Attach PD Anchors to increase your carry options with any of our straps. Compatible with all versions of our Anchors and straps.
  • Works with OEM Straps:
  • Attach any standard camera neck strap or wrist strap. Works with strap ends up to 11mm wide.
  • Twist Resistant:
  • Ultra-secure 4mm hex drive with anti-twist pad.
  • Fits Any Camera:
  • Screws into any standard 1/4"-20 tripod socket.
  • Super Strong:
  • Rugged, weatherproof machined/anodized aluminum construction.
  • Note: Anchor Mount is not compatible with tripods or Capture system. If you frequently use a tripod or Capture, check out our Standard Plate.
  • Specifications
  • Wrist Loop Size:
  • Diameter when open: 9.7 cm (3.82 in), but easily fits hands 5+ inches wide diameter when cinched: 4.5 cm (1.75 in)
  • Strap Width:
  • 19 mm (0.75 in)
  • Materials:
  • Anodized aluminum plate with hard rubber anti-twist pad, turned/machined stainless steel hex-drive screw
  • Weight:
  • Unpackaged: 18 g (.71 oz)
  • Packaged: 36 g (1.3 oz)
  • Size:
  • Length: 30 mm (1.2 in)
  • Width: 20 mm (.79 in)
  • Height (protrusion from camera): 5 mm (.20 in)
  • Strap Loop Size:
  • Fits straps up to 13mm (.51 in) wide
  • Strength Rating:
  • Can withstand well over 200 lbs (90 kg), making Anchor Mount safe for use with the largest of professional cameras.
  • Warranty:
  • Guaranteed for life.

What’s Included:

  • Anchor Mount
  • 4mm hex key
    Back top top Skip to Navigation